Description
The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a broad range of fundamental knowledge for all IT careers. The CCNA certification training covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. Through a combination of lecture, hands-on labs, and self-study, you will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course also gives you a foundation in network programmability, automation, and software-defined networking.
CCNA Certification Training Delivery Methods
- Classroom
Advanced Networking & Associate-Level Engineer Programme – CCNA (Consolidated)
1. Mastering Switching & VLANs
Building high-performance, secure LAN environments
Key Topics:
• Layer 2 Switching Deep Dive
• VLAN Architecture & Trunking Strategies
• Spanning Tree Protocol (STP) and Rapid STP
• Port Security and Access Control
• EtherChannel & Link Aggregation Techniques
Hands-On Lab:
• Configuring Secure Multi-VLAN Networks
2. Wireless & Remote Connectivity
Design and manage enterprise-grade wireless networks
Key Topics:
• Wi-Fi Standards & Frequency Bands
• WLAN Topologies: Enterprise vs Ad-Hoc
• SSID Design, Authentication & Encryption
• Wireless Security Best Practices (WPA3, Enterprise Authentication)
• Remote Access Technologies Overview
Hands-On Lab:
• Deploying a Secure Enterprise WLAN
3. IP Services & Infrastructure Essentials
Managing critical network services for enterprise environments
Key Topics:
• DHCP & DNS Advanced Configuration
• NTP for Network Time Synchronization
• SNMP Monitoring & Network Management
• Network Address Translation (NAT, PAT)
• Intro to Device Automation & Programmability
Hands-On Lab:
• Implementing DHCP/DNS in a Multi-Site Setup
4. Advanced Routing & WAN Technologies
Take routing to the next level with real-world enterprise WAN protocols
Key Topics:
• BGP: Introduction, Attributes, and Route Selection
• Advanced EIGRP & OSPF: Redistribution & Policy Control
• MPLS Fundamentals & L3VPNs
• VPNs: Site-to-Site, GRE, DMVPN
• Protocol Design Decisions: When to Use EIGRP, OSPF, or BGP
Hands-On Lab & Case Studies:
• Multi-Site WAN Design with BGP/MPLS & DMVPN
• Case Study 1: Deploy a Redundant BGP WAN for a Global Retail Chain
• Case Study 2: Configure MPLS L3VPN for a Multi-Branch Financial
Firm
• Case Study 3: Implement Site-to-Site GRE VPNs Between Regional
Offices
• Case Study 4: Advanced EIGRP and OSPF Redistribution in a Merged
Enterprise Network
5. Advanced Network Design Techniques
From theory to real enterprise network design
Key Topics:
• VLSM & Subnetting Projects for Scalable Networks
• Hierarchical Network Design (Core, Distribution, Access)
Case Studies & Project Work:
• Design an IP Scheme for a Chain of Hotels
• Enterprise Network for Multiple Schools
• Network Layout for Blue-Chip Corporate Offices
• Design a Highly Available Campus Network for a University
• Multi-Tenant Data Center Network Design
• Scalable Network for a Healthcare Facility with Multiple Sites
Lab Project:
• Drafting Full-Scale Network Designs with IP Plans
6. Advanced IP & WAN Technologies
Master IPv6 addressing, NAT, and enterprise WAN implementations
Key Topics:
• IPv6 Addressing & Subnetting (Global Unicast, Link-Local, Unique
Local)
• IPv6 Routing Concepts (EIGRPv6, OSPFv3 basics)
• IPv6 Transition Mechanisms (Dual-Stack, Tunneling)
• Network Address Translation (NAT, PAT)
• WAN Technologies Overview: MPLS, VPNs (Site-to-Site, GRE,
DMVPN), Leased Lines, Metro Ethernet, Broadband, DSL
• WAN Design & Best Practices
Hands-On Labs:
• Configure IPv6 addressing on enterprise networks
• Implement NAT and PAT for multi-site networks
• Configure and test Site-to-Site VPNs
• WAN connectivity setup across multiple branch offices
Case Studies / Projects:
• Design a dual-stack IPv4/IPv6 network for a multinational company
• Implement NAT/PAT for a growing enterprise network
• Deploy a VPN/MPLS WAN connecting 5 branch offices
• Troubleshoot IPv6 routing and WAN connectivity issues
7. Super Lab: Advanced Troubleshooting Projects
Hands-on, real-device troubleshooting across all technologies
Hands-On Labs:
• Routing Super Lab: BGP, EIGRP, OSPF, Redistribution Scenarios
• Switching Super Lab: STP, VLAN, EtherChannel, Port Security
• VPN Troubleshooting Lab: Site-to-Site, GRE, DMVPN Issues
• Security Lab: ACLs, Device Hardening, and Firewall Configurations
• End-to-End Network Simulation Projects: Realistic Multi-Site
Networks
Case Study Examples:
• Advanced Troubleshooting Routing Super Lab
• Enterprise Switching Failure Analysis
• VPN Connectivity & Security Incident Response Lab
• Troubleshoot Inter-VLAN Routing and STP Loops in a Campus Network
• Resolve BGP Failover Issues for a Multi-Region ISP Client
• Identify and Fix Performance Bottlenecks in a Large-Scale Corporate
Get This Course
Become a Network Engineer FAQs
This course is designed for anyone seeking CCNA certification. The course also provides foundational knowledge for all support technicians involved in the basic installation, operation, and verification of Cisco networks.
The job roles best suited to the material in this course are:
- Entry-level network engineer
- Network administrator
- Network support technician
- Help desk technician
The CCNA v1.0 course is a broad-based training programme that provides fundamental knowledge for all IT careers. It covers topics such as configuring network components, managing network devices, identifying basic security threats, and network programmability, automation, and software-defined networking.
This course will help you:
- Learn the knowledge and skills to install, configure, and operate a small- to medium-sized network
- Gain a foundation in the essentials of networking, security, and automation
The CCNA v1.0 course is a broad-based training programme that provides fundamental knowledge for all IT careers. It covers topics such as configuring network components, managing network devices, identifying basic security threats, and network programmability, automation, and software-defined networking.
The course is available in both in-person and online delivery methods over 5-days. This course also requires 3-days of self-study.
In the course, you will learn how to identify the components of a computer network, understand the model of host-to-host communication, describe the features and functions of the Cisco Internetwork Operating System (IOS) software, install and configure switches, routers, and wireless LAN controllers, and understand basic security threats. You will also learn about IPv4 and IPv6 networking, routing, VLANs, dynamic routing protocols, WAN and VPN concepts, and network programmability and software-defined networking.
There are no formal prerequisites for CCNA certification, but you should make sure to have a good understanding of the exam topics. Before taking this course, you should have:
- Basic computer literacy
- Basic PC operating system navigation skills
- Basic Internet usage skills
- Basic IP address knowledge
The Cisco Certified Network Associate (CCNA) exam is a certification exam that tests your knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure security.
CCNA certification validates your knowledge and skills in network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, and infrastructure security. It demonstrates to employers and clients that you have the knowledge and skills to design, implement, and troubleshoot Cisco network solutions.
